Argitalpenak (22) FEDERICO GARCIA GALVAN argitalpenak

2024

  1. Eco-Friendly Sol–Gel Coatings with Organic Corrosion Inhibitors for Lightweight AZ61 Alloy

    Gels, Vol. 10, Núm. 3

  2. New electrochemical method for the determination of the barrier properties of corrosion protective coatings

    Progress in Organic Coatings, Vol. 190

2023

  1. Evaluation of Low-Toxic Hybrid Sol-Gel Coatings with Organic pH-Sensitive Inhibitors for Corrosion Protection of AA2024 Aluminium Alloy

    Gels, Vol. 9, Núm. 4, pp. 294

2022

  1. Efecto de la adición de nanotubos de carbono de pared simple y nanotubos de carbono de pared múltiple en las propiedades del cemento

    LVIII Congreso Nacional de la Sociedad Española de Cerámica y Vidrio

2021

  1. Experimental apparent stern–geary coefficients for AZ31B Mg alloy in physiological body fluids for accurate corrosion rate determination

    Metals, Vol. 11, Núm. 3, pp. 1-21

2020

  1. Efficacy of laser shock processing of biodegradable Mg and Mg-1Zn alloy on their in vitro corrosion and bacterial response

    Surface and Coatings Technology, Vol. 384

  2. Organic-inorganic hybrid coatings containing phosphorus precursors prepared by sol–gel on Ti6Al4V alloy: Electrochemical and in-vitro biocompatibility evaluation

    Progress in Organic Coatings, Vol. 148

2019

  1. Effect of ZrO2 and L-Cys nanoparticles as dopants in sol-gel of mesoporous silica coating for corrosion protection of AZ61 magnesium alloy

    Revista de metalurgia, Vol. 55, Núm. 4, pp. 155

  2. Effect of temperature on the corrosion behavior of biodegradable AZ31B magnesium alloy in ringer’s physiological solution

    Metals, Vol. 9, Núm. 5

2018

  1. A Critical Review of the Application of Electrochemical Techniques for Studying Corrosion of Mg and Mg Alloys: Opportunities and Challenges

    Magnesium Alloys - Selected Issue

2017

  1. A Measuring Approach to Assess the Corrosion Rate of Magnesium Alloys Using Electrochemical Impedance Spectroscopy

    Magnesium Alloys

  2. Biocompatibility and corrosion protection behaviour of hydroxyapatite sol-gel-derived coatings on Ti6Al4V alloy

    Materials, Vol. 10, Núm. 2

  3. Controlled Rate Thermal Analysis (CRTA) as New Method to Control the Specific Surface in Hydroxyapatite Thin Coatings

    Modern Technologies for Creating the Thin-film Systems and Coatings

  4. Influence of aluminium enrichment in the near-surface region of commercial twin-roll cast AZ31 alloys on their corrosion behaviour

    Corrosion Science, Vol. 123, pp. 182-196

  5. Influence of hydrogen bubbles adhering to the exposed surface on the corrosion rate of magnesium alloys AZ31 and AZ61 in sodium chloride solution

    Materials and Corrosion, Vol. 68, Núm. 6, pp. 651-663

2015

  1. Effect of heat treatment of magnesium alloy substrates on corrosion resistance of a hybrid organic-inorganic sol-gel film

    RSC Advances, Vol. 5, Núm. 128, pp. 105735-105746

  2. Native Oxide Films on AZ31 and AZ61 Commercial Magnesium Alloys – Corrosion Behaviour, Effect on Isothermal Oxidation and Sol–gel Thin Film Formation

    New Trends in Alloy Development, Characterization and Application

  3. Waterborne sol-gel coatings doped with corrosion inhibitors for the protection of Mg-Al alloys

    Proceedings of the Forty-Second Annual International Waterborne, High-Solids, and Powder Coatings Symposium (Lulu), pp. 349-365

2014

  1. A cathodic delamination study of coatings with and without mechanical defects

    Corrosion Science, Vol. 82, pp. 432-436

  2. Influence of substrate composition on corrosion protection of sol-gel thin films on magnesium alloys in 0.6 M NaCl aqueous solution

    Progress in Organic Coatings, Vol. 77, Núm. 11, pp. 1642-1652