Critical examination of chemically modified hybrid thermosets: Synthesis, characterization and mechanical behavior in the plateau regime of polyaminosiloxane-nitrile-DGEBA

  1. Loayza, Artemia 1
  2. Cabanelas, Juan C. 1
  3. González, María 1
  4. Baselga, Juan 1
  1. 1 Universidad Carlos III de Madrid
    info

    Universidad Carlos III de Madrid

    Madrid, España

    ROR https://ror.org/03ths8210

Aldizkaria:
Polymer

ISSN: 0032-3861,  1873-2291

Argitalpen urtea: 2015

Alea: 69

Orrialdeak: 178-185

Mota: Artikulua

DOI: 10.1016/J.POLYMER.2015.05.054 GOOGLE SCHOLAR

Beste argitalpen batzuk: Polymer

Garapen Iraunkorreko Helburuak

Laburpena

Poly(3-aminopropylmethylsiloxane) has been modified with acrylonitrile via aza Michael addition and a broad range of modified oligomers have been prepared with CN:NH2 ratio ranging between 0.1 and 1. NMR and FTnIR analysis reveals that acrylonitrile modification proceeds without formation of tertiary amines. Modified oligomers have been characterized by DSC and analysis of Tg reveals that the adducts are self-associated probably due to weak hydrogen bonding and dipole interactions. The modified oligomers with a modification degree higher than 0.4 were miscible with DGEBA. The low and high temperature relaxations of the cured thermosets have been measured by DMTA. In addition to the commonly observed β2 relaxation, a new β1 process linked by an isosbestic point to β2 has been found. β1 is attributed to an extended segment comprising the pendant propionitrile group as well as the aminopropyl segment that connects tertiary amines to the polysiloxane backbone. Elastic modulus as well as the α relaxation can be tuned from high Tg and high rubbery modulus to low Tg and high damping thermosets changing the nitrile content. The experimental network structure obtained from elastic measurements and the Tg were related through well established structure-property relations.

€ Ikusi finantzaketa

Finantzaketari buruzko informazioa

Finantzatzaile

Erreferentzia bibliografikoak

  • Chruściel, (2015), Prog. Polym. Sci., 41, pp. 67, 10.1016/j.progpolymsci.2014.08.001
  • Srividhya, (2005), Macromol. Chem. Phys., 206, pp. 2501, 10.1002/macp.200500143
  • Yilgör, (2014), Prog. Polym. Sci., 39, pp. 1165, 10.1016/j.progpolymsci.2013.11.003
  • Hou, (2000), Polymer, 41, pp. 3263, 10.1016/S0032-3861(99)00525-X
  • Cabanelas, (2001), Macromol. Rapid Commun., 22, pp. 694, 10.1002/1521-3927(20010601)22:9<694::AID-MARC694>3.0.CO;2-8
  • Cabanelas, (2005), Polymer, 46, pp. 6633, 10.1016/j.polymer.2005.05.017
  • Gonzalez, (2004), Polymer, 45, pp. 5533, 10.1016/j.polymer.2004.05.059
  • González, (2008)
  • Cabanelas, (2005), Macromolecules, 38, pp. 961, 10.1021/ma0487352
  • Cabanelas, (2003), J. Mat. Proc. Tech., 143–144, pp. 311, 10.1016/S0924-0136(03)00480-1
  • Prolongo, (2003), Macromol. Symp., 198, pp. 283, 10.1002/masy.200350824
  • Mather, (2006), Prog. Polym. Sci., 31, pp. 487, 10.1016/j.progpolymsci.2006.03.001
  • Cabanelas, (2000)
  • Dermitzaki, (2008)
  • Smith, (2013), pp. 65
  • Mukherjee, (2007), Lett. Org. Chem., 4, pp. 54, 10.2174/157017807780037414
  • González, (2012)
  • Wang, (2005), Polymer, 46, pp. 3507, 10.1016/j.polymer.2005.02.095
  • Pascault, (2002), pp. p 85
  • Schneider, (1997), Polymer, 38, pp. 325, 10.1016/S0032-3861(96)00652-0
  • Aubin, (1988), Macromolecules, 21, pp. 2945, 10.1021/ma00188a010
  • Kwei, (1984), J. Polym. Sci. Polym. Lett., 22, pp. 307, 10.1002/pol.1984.130220603
  • Lu, (1992), Macromolecules, 25, pp. 3242, 10.1021/ma00038a033
  • Couchman, (1978), Macromolecules, 11, pp. 1156, 10.1021/ma60066a018
  • Heux, (1997), Polymer, 38, pp. 1767, 10.1016/S0032-3861(96)00694-5
  • Shi, (1996), Macromolecules, 29, pp. 605, 10.1021/ma9512418
  • Bershtein, (1994), pp. 20
  • Bershtein, (1994), Adv. Polym. Sci., 114, pp. 93
  • Kremer, (2003)
  • Cerveny, (2008), Macromolecules, 41, pp. 8669, 10.1021/ma8016585
  • Detwiler, (2012), J. Mater. Sci., 47, pp. 3493, 10.1007/s10853-011-6182-4
  • McAninch, (2013), J. Appl. Polym. Sci., 130, pp. 1621, 10.1002/app.39322
  • Katz, (1963), Polymer, 4, pp. 417, 10.1016/0032-3861(63)90053-3
  • Guerrero, (1996), Polymer, 37, pp. 2195, 10.1016/0032-3861(96)85865-4
  • Wan, (2011), Chem. Eng. J., 171, pp. 357, 10.1016/j.cej.2011.04.004
  • Wan, (2012), Thermochim. Acta, 188, pp. 160
  • DiMarzio, (1964), J. Res. NBS, 68A, pp. 611, 10.6028/jres.068A.059
  • Fox, (1955), J. Polym. Sci., 15, pp. 371, 10.1002/pol.1955.120158006
  • Bellenger, (1987), Sci. B Polym. Phys., 25, pp. 1219, 10.1002/polb.1987.090250604