Autmod3: An Automatic 3D Modularization System

  1. R. Diez 1
  2. M. Abderrahim 1
  3. V. M. Padrón 1
  4. L. Celorrio 1
  5. J. M. Pastor 1
  6. C. Balaguer 1
  1. 1 Universidad Carlos III de Madrid
    info

    Universidad Carlos III de Madrid

    Madrid, España

    ROR https://ror.org/03ths8210

Actes:
17th International Symposium on Automation and Robotics in Construction (ISARC)

Editorial: The International Association for Automation and Robotics in Construction (IAARC)

ISSN: 2413-5844

ISBN: 9789570266986

Any de publicació: 2000

Pàgines: 1-7

Congrés: 17th ISARC, Taipei, Taiwan

Tipus: Aportació congrés

DOI: 10.22260/ISARC2000/0076 GOOGLE SCHOLAR lock_openAccés obert editor

Resum

This paper presents the new automatic system called AUTMOD3 for automaticdesign of modular buildings. The system permits to obtain in an automatic way, and withguided assistance the dimensions and position of the 3D and/or 2D modules that are neededto construct a building starting from the traditional architectural design. The system isbased on the well-known CAD system commonly used by designers. Specially developedsoftware modules, menus and libraries are linked to the CAD system. A library of severaltypes of modules assists and guides the designer through the process. It contains structural3D modules, 2D facade modules, 3D roof modules, etc. The selection of the modules willbe carried out responding to several production criteria: minimum number of modules,minimum number of different modules, module size limitation due to pre-fabricationprocess, etc. Other criteria are also taken into account: module size limitation due totransportation restriction, limitation due to on-site assembly, etc. The proposedmodularization system does take into consideration only technical aspects of the designedbuilding. Nevertheless, future developments will include some aesthetic aspects.

Referències bibliogràfiques

  • R. Diez, “Obtaining facade moulds to fabricate panels in with a CAD system”, in Spanish, Licentiate Thesis, Polytechnic University of Madrid, 1996.
  • E. Gambao, C. Balaguer, A. Barrientos, R. Saltarén and E. A. Puente, “Robot Assembly System for the Construction Process Automation”, IEEE International Conference on Robotics & Automation, Albuquerque (USA), 1997.
  • R. Lewis, C. Séquin, “Generation of 3D building models from 2D architectural plans”, Computer-Aided Design, vol.30, nº 10, pp. 765-779, 1998.
  • C. MacMahon, J. Browne, “CADCAM. From principles to practice”, Addison-Wesley, 1993.
  • J.M. Pastor, “Modular construction system oriented to robot by means of C.I.C. techniques”, in Spanish, Ph.D. Thesis, Polytechnic University of Madrid, 1997.
  • G. Pelliteri, “A tool for a first analysis of architectural façades”, Automation in Construction, vol. 5, nº 5, pp. 379-391, 1997 L.F. Peñín; C. Balaguer; J.M. Pastor; F.J. Rodríguez; A. Barrientos; R. Aracil; “Robotized Spraying of Prefabricated Panels”, IEEE Robotics & Automation Magazine, Sept. 1998, pp. 18-29.
  • O. Ransen, “AutoCAD programming in C/C+ +”, John Wiley & Sons, 1997.
  • V. Karhu, “Product Model Based Design of Precast Facades”, Licentiate Thesis, Royal Institute of Technology, Sweden, 1997.